Pyrolytic Boron Nitride (PBN) OLED Crucible

typical thickness is 0.8~1.5mm

SKU: PBN-OLEDC

Pyrolytic Boron Nitride OLED Crucible, PBN OLED Crucible

Pyrolytic Boron Nitride (PBN) OLED Crucible is produced by the CVD process to create its solid body and all the boron nitride crystals grow parallel to the surface on which the vapor is deposited. Due to the nature of the CVD process, thick wall products (>3mm) are usually not available. For PBN OLED crucibles, the typical thickness is 0.8~1.5mm.

PBN products are extremely pure, as the purity of gas material is easier to be controlled. Typically, PBN products have a total impurity of <100 ppm, which means the purity is no less than 99.99%. With such a high purity level, PBN products are ideal products for semiconductor industries & vacuum systems.

With its high density and purity, PBN is becoming a widely used material in vacuum processes. The CVD process gives this pyrolytic boron nitride an almost perfect layered structure, which leads to anisotropic thermal conductivity, making it an ideal material to make crucibles for OLED industries. OLED is an emerging advanced display technology. The PBN OLED crucible is used as the main container of the evaporation element on the OLED production line.

PBN Properties

Properties	Units	Values
Density	g/cm³	1.95-2.20
Tensile Strength	MPa	112
Bending Strength	MPa	173
Compression Strength	MPa	154
Young’s Modulus	GPa	18
Thermal Conductivity	W/m°C	“a” 60 “c” 2
Specific Heat	J/g·℃	0.90（RT）
Resistivity	Ω.cm	2×10¹⁵
Dielectric Strength	D.C. volts/mm	2×10¹⁵
Dielectric Constant		“c” 3.07
Metal Impurity Content	ppm	<10

Pyrolytic Boron Nitride (PBN) OLED Crucible Dimensions

Specification	Inner Diameter (mm)	Lip Diameter (mm)	Height (mm)
300cc	55	70	160
500cc	55	82	190
580cc	62	84	186
700cc	61	85	240
1200cc	78	115	2

* This table is a typical crucible specification, others can be customized

Packaging PBN OLED Crucible

As a ceramic material, boron nitride is quite fragile in a lot of cases. The Pyrolytic Boron Nitride (PBN) OLED crucibles are usually held in plastic bags by vacuum, and protected with heavy foam.